Name: SH LITHIUM





SH Lithium Lithium-Ion Battery Waterproof / High-Performance 12V
Choose options
High-Performance Batteries for Electric Motors and More
The SH Lithium Lithium-Ion Battery Waterproof / High-Performance 12V is available in three variants: 50 A, 100 A and 150 A capacity, all with 16.8 V outputs. The 50 A and 100 A models are SR versions, meaning they also feature regulated 12V 10 A outputs for fish finders. Thanks to the 16.8 V output voltage, these high-performance batteries are built for all brushless electric motors that require this voltage to operate. The two SR models with regulated 12V 10 A outputs can additionally power fish finders - and because of this, those models come with a total of 4 outputs on the case, which is explained in more detail further below.
The integrated Battery Management System (BMS) allows the batteries to be discharged to 100%, giving a usable capacity that is significantly higher than that of AGM and gel batteries. This means you get every last bit of power out on the water. At the same time, the BMS ensures consistent output throughout the discharge cycle and contributes to the battery's long service life.
A Purpose-Built Case for Protection and Transport
Each SH Lithium Lithium-Ion Battery Waterproof / High-Performance 12V comes in a compact, purpose-built plastic case. The case is highly robust and provides a secure, waterproof enclosure for the battery. The waterproofing is rated for heavy rain, spray and similar conditions - full submersion in water should be avoided. This case lets you use the battery confidently in demanding conditions.
The 16.8 V contacts for connecting to your device sit at the top and bottom corners on the left and right sides of the case. On the SR models, the regulated, slightly smaller 12V connections and an on/off button are positioned between these contacts. Note that the on/off button controls only the 12V outputs - it has no effect on the 16.8 V outputs. To make polarity easy to read at a glance, the positive contacts are red and the negative contacts are black.
An Information-Rich Display on the Case
The case features a clear, easy-to-read display that gives you all the information you need to get the most from the battery.
- State of charge in % - so you can plan your session with confidence
- Voltage readout in Volts
- Current draw in Amps - useful for monitoring exactly how much power your connected device is consuming
- Remaining capacity in Ah
With all this data on hand, you can plan your day on the water precisely - including how long you have left before the battery runs out. Getting caught in the middle of a lake with a flat battery is far from ideal, and this display helps you avoid exactly that.
Charger Included - and How to Use It Correctly
Every SH Lithium Lithium-Ion Battery Waterproof / High-Performance 12V comes with the matching charger. Use only this charger, as it is optimised for these batteries - using unauthorised chargers can cause damage. There are a few important points to follow when charging.
Always connect the charging cables to the battery contacts first, and only then plug the charger into the mains. If small sparks occur when attaching the cables to the contacts, there is no cause for concern. What you must avoid is connecting the charger to the mains before attaching the cables - if the cable ends then touch each other, it creates a short circuit in the charger and blows the fuse. A spare fuse is included in the box, but it is far better to avoid this situation altogether.
There is one critical point that applies exclusively to the SR models with 4 contacts: never connect the charger to the regulated outputs. These are not suitable for charging and doing so will cause irreparable damage. The charger must ALWAYS be connected to the 16.8 V contacts.
During charging, the charger shows a red LED. Even if the display reads 100%, wait until this LED turns green before disconnecting - only then is charging complete. Following this procedure protects the battery's service life and keeps it delivering strong performance session after session. The batteries are shipped already fully charged at 100%, so you can head straight to the water the moment yours arrives.
Connecting Safely in the Boat
Connect the SH Lithium Lithium-Ion Battery Waterproof / High-Performance 12V via the positive and negative contacts on the case. Always make sure the connections are secure and fully seated with no play. A loose connection can cause overheating and damage to the case. While you are out on the water, check the connections periodically to confirm that vibrations have not worked them loose. Follow all the usage instructions - including those printed on the back of the case - and this high-performance lithium-ion battery will serve you well for a long time.
Key Facts:
- Lithium-ion battery
- 16.8 V output voltage
- 2 models with regulated 12V 10 A outputs
- Available in multiple capacities
- Built for brushless electric motors
- SR models also suitable for fish finders
- 100% discharge capacity thanks to BMS
- Display showing voltage, charge in % and Ah, and current draw in Amps
- Supplied in a waterproof, impact-resistant plastic case
- Compact and lightweight
- Charger included
- Spare fuse for the charger included
Name: SH LITHIUM
Address: 1 Route de Couet, 82210 Caumont, Frankreich
Email: contact@sh-lithium.fr
Website: https://www.sh-lithium.fr/
Name: SH Lithium
Email: contact@sh-lithium.fr
Beachten Sie alle Sicherheits- und Anwendungshinweise, um eine ordnungsgemäße Nutzung des Produkts sicherzustellen. Unsachgemäße Handhabung kann zu Schäden oder Störungen führen. Tragen Sie während der Verwendung geeignete Kleidung und Ausrüstung. Überprüfen Sie das Produkt regelmäßig auf Anzeichen von Verschleiß oder Beschädigung. Ersetzen Sie das Produkt bei sichtbaren Veränderungen sofort, um die sichere Nutzung zu gewährleisten. Verwenden Sie ausschließlich geeignete Akkus für den vorgesehenen Zweck. Tauchen Sie die Akkus nicht in leitfähiges Material, beispielsweise Wasser. Befolgen Sie die nationalen und internationalen Vorschriften zur Entsorgung des Produktes und der Akkus. Außer Reichweite von Kindern aufbewahren. Von brennbaren Materialien und entzündlichen Stoffen fernhalten.






































